OUR PRODUCTS

HOME  |  OUR PRODUCTS  |  BY CATEGORIES  |  SOUND LEVEL & VIBRATION METER  |  DETAILS
SELECT CATEGORIES

SOUND LEVEL & VIBRATION METER

<p>
	Gastec Detector Tubes indicate concentrations directly by way of a calibrated scale printed on the tubes. At Gastec, we endeavour to achieve highest quality detector tubes for analysing airborne gases/vapours, as well as pollutants in soil and water through our advanced state-of-the-art research and development. Through our efforts we have acquired a solid reputation among our customers in virtually all sectors of industry, commerce and society. Tubes are now available for more than 500 different applications.</p>
<ol>
	<li>
		Break off the both ends of the detector tube by using the built-in diamond tip breaker. Confirm the pump handle is fully pushed in. Then insert the detector tube into the rubber inlet with G   mark towards the gas sampling pump.</li>
	<li>
		Align the guide marks on the pump shaft red (  )100 or 50 mL, and pull out the handle until it is locked. Wait until the sampling time has elapsed. With an easy-to-see flow finish indicator (white disk pops out when the prescribed volume has been fully drawn), the operator is assured that the sampling is complete.</li>
	<li>
		The colour in the detector tube changes as the gas is drawn in. Wait the required sampling time and read the measurement at the end of the coloured layer. (Please note the concentration or mark the colour change demarcation on the glass tube with a pen immediately).</li>
</ol>

Gastec Detector Tubes indicate concentrations directly by way of a calibrated scale printed on the tubes. At Gastec, we endeavour to achieve highest quality detector tubes for analysing airborne gases/vapours, as well as pollutants in soil and water through our advanced state-of-the-art research and development. Through our efforts we have acquired a solid reputation among our customers in virtually all sectors of industry, commerce and society. Tubes are now available for more than 500 different applications.

  1. Break off the both ends of the detector tube by using the built-in diamond tip breaker. Confirm the pump handle is fully pushed in. Then insert the detector tube into the rubber inlet with G   mark towards the gas sampling pump.
  2. Align the guide marks on the pump shaft red (  )100 or 50 mL, and pull out the handle until it is locked. Wait until the sampling time has elapsed. With an easy-to-see flow finish indicator (white disk pops out when the prescribed volume has been fully drawn), the operator is assured that the sampling is complete.
  3. The colour in the detector tube changes as the gas is drawn in. Wait the required sampling time and read the measurement at the end of the coloured layer. (Please note the concentration or mark the colour change demarcation on the glass tube with a pen immediately).
  • PN.
JAKARTA:
Rukan Gold Coast Blok A No. 1-2, Jl. Pantai Indah Kapuk Boulevard RT 001 RW 006, Kamal Muara, Penjaringan, Kota ADM Jakarta Utara, 14470 | Phone: (021) 6385 5111, 2257 2141 | Fax: (021) 6385 5222

CIKARANG:
Komplek Ruko CBD Blok B. No. 2, Jl. Niaga Raya Kavling. AA3 - JABABEKA 2, Cikarang Selatan | Phone: (021) 8938 4323

BALIKPAPAN:
Centra Bizpark 2 Blok CRM No. 18-19, Jl. Syarifuddin Yoes, Sepinggan, Balikpapan, 76115 | Phone: (0542) 721 3858

BANJARBARU:
Jl. Jend. Ahmad Yani, Grand Palace Park No. B7-B8, Banjarbaru, Kalimantan Selatan | Phone: (0511) 593 3334

SURABAYA:
Jl. Raya Jemur Sari 76 Blok D-11, Surabaya - 60237, Indonesia | Phone: (031) 847 2155 | Fax: (031) 847 2188
Copyright 2024 © PT. WAHANA SAFETY INDONESIA   Syarat & Ketentuan |  Privacy Statement